New Construction Inspection Atlanta, GA

A contractor wearing a yellow hard hat reviews plans on a digital tablet inside the framed interior of a new construction home in Atlanta, GA.

New Construction Inspections

Protect your new home at every stage of the build

A new construction inspection in Atlanta, GA is an independent check of your newly built home at the stages that matter most: before the drywall goes up, before you close, and before your builder’s warranty runs out. Serenity’s InterNACHI-certified inspectors find construction defects while they’re still your builder’s responsibility to fix.

New doesn’t mean perfect. Builders work on tight schedules with many subcontractors, and the county or city inspector only checks minimum code. Since 2012, our family-owned team has completed more than 12,000 inspections across metro Atlanta. We’re on your side, not the builder’s.

A contractor wearing a yellow hard hat reviews plans on a digital tablet inside the framed interior of a new construction home in Atlanta, GA.

Pre-Drywall Inspection in Metro Atlanta

Take a deeper look before the walls go up

A pre-drywall inspection checks your home’s framing, wiring, plumbing, ductwork, and windows after the rough-ins are done but before drywall covers them. It’s the only time you can see what’s inside your walls. Fixing a problem now costs your builder a few hours. Fixing it after drywall can mean tearing walls open.

A person holds an infrared camera and a portable monitor displaying a thermal heat scan of a residential building.

What We Inspect Before the Walls Close

  • Framing and structure: studs, headers, trusses, joists, beams, and load paths
  • Fasteners and connectors: hurricane ties, hold-downs, joist hangers, and nailing patterns
  • Sheathing and house wrap: gaps, tears, and proper lapping
  • Windows and exterior doors: flashing and water-resistive barrier details
  • Electrical rough-in: wire runs, box placement, stapling, and protection plates
  • Plumbing rough-in: supply and drain lines, venting, supports, and nail plates
  • HVAC ductwork: routing, connections, sealing, and crushed or kinked runs
  • Fire blocking and draft stopping where required
  • Roof decking and attic framing, plus crawl space and foundation areas we can access
  • Insulation and moisture, when installed, using infrared thermal imaging to spot gaps.
A construction engineer wearing a white hard hat and safety jacket holds blueprints while inspecting a concrete pillar at an outdoor building site.

When to Schedule Your Pre-Drywall Inspection

Schedule your pre-drywall inspection once the framing, electrical, plumbing, and HVAC rough-ins are finished and the municipal framing inspection has passed. Ideally, this is before insulation goes in.

Ask your builder’s site manager for the “pre-drywall” or “frame walk” date as soon as framing starts. That way, you can book us before the window closes. Book by noon, and we can often get out the same or next day.

Common Pre-Drywall Findings in Atlanta-Area Homes

Atlanta’s fast building pace means crews move quickly from one home to the next. As a result, we often find missing nail plates over pipes and wires, cut or notched framing, gaps in window flashing, and disconnected or crushed ductwork. Georgia’s humid climate also makes flashing and house wrap details important. Small gaps here can lead to hidden moisture problems later.

A Serenity Home Inspections inspector steps out of a branded company truck to provide home inspection services in Atlanta.

Final Inspection Before Closing

Make sure the home is built perfectly

A final new construction inspection is a full top-to-bottom check of your finished home before you close. It confirms the builder completed the work and gives you a written repair list while you still have leverage. Once you sign, getting a builder to come back can take much longer.

An aerial drone view showing the gray asphalt shingle roof of a single-story residential home surrounded by trees and a green lawn.

What the Final Inspection Covers

  • Roof, gutters, siding, and exterior trim
  • Grading and drainage around the foundation
  • Electrical panel, outlets, GFCI/AFCI protection, and fixtures
  • Plumbing fixtures, water heater, and visible supply and drain lines
  • HVAC system operation and airflow
  • Built-in appliances
  • Windows, doors, and hardware
  • Attic insulation and ventilation
  • Interior finishes: drywall, flooring, trim, cabinets, and paint
A gray outdoor air conditioning condenser unit installed on a concrete pad next to an exterior red brick wall.

Final Inspection vs. the Builder's Walkthrough

The builder’s walkthrough (often called the “blue tape” walk) is led by the builder and focuses on cosmetic items. A final inspection is done by an independent inspector who works for you. We check the systems you can’t judge on a quick walk, like the roof, attic, electrical panel, and HVAC. Then, you can bring our report to your walkthrough and add those items to the builder’s punch list.

Get Started with Serenity Today

Contact us right away to take your first step towards a better living experience.

A smiling couple sits at a kitchen counter while viewing content on a digital tablet held by a service professional.

11-Month Warranty Inspection

Get things fixed under the builder’s warranty

An 11-month warranty inspection checks your new home for defects that showed up after move-in, while your builder’s warranty still covers them. Most new homes carry a one-year builder warranty on workmanship and materials. Our report gives you a clear, photo-backed list to submit before that coverage ends.

A prominent vertical crack runs down the center of a weathered, tan concrete surface marked with scored rectangular lines.

Why Schedule at 11 Months?

Scheduling at about 11 months leaves you time to send the report to your builder before the one-year warranty ends. After a year of heating, cooling, and Georgia humidity, the home has gone through a full seasonal cycle. That’s when settling, leaks, and system issues tend to show up. Check your warranty paperwork for your exact end date.

What We Look For After Move-In

  • Drywall and foundation cracks from settling
  • Doors and windows that stick or don’t latch
  • Roof, flashing, and gutter leaks
  • Plumbing leaks under sinks and around fixtures
  • HVAC performance and duct issues
  • Grading and drainage problems after a year of rain
  • Insulation gaps and air leaks, found with thermal imaging
  • Items from your original punch list that were never fixed

Why Choose Us

Choose us for exceptional quality, innovative solutions, and unmatched customer satisfaction.

Same day reporting

You’ll receive a detailed electronic report filled with photos/videos and descriptions of your inspector’s findings in plain language.

12k+ inspections

We have delivered more than 12,000 inspections and counting. We are a team of local experts with reliable experience in home inspections.

Years in business

With 13 years of professional experience in home inspections, Serenity Inspections has built a reputation for its trusted services.

Family owned

We’re proud to be a family-owned company, committed to treating every client with honesty, care, and personal attention.

Free 90-day warranty

Serenity Home Inspections believes in protection with inspection & provides complimentary warranty coverage for our customers.

Certified Inspectors

Our inspectors are fully certified by the InterNACHI. You can trust our trained team, that is up to date with the latest industry standards.

200% Guarantee

If you’re not fully satisfied with your inspection, we’ll refund your fee and provide a second inspection with another inspector at no cost.

Same or Next Day Scheduling

Schedule by noon, and we’ll ensure your inspection occurs same day or next day. With our fast & reliable service, you don’t have to wait.

Thermal Imaging & Drones

We use advanced tools like infrared thermal cameras and aerial drones to detect hidden issues and inspect hard-to-reach areas.

Our Atlanta Service Area

We inspect within a 60-mile radius of Atlanta, working from our office in Peachtree Corners.

Core Metro Counties

Fulton, Gwinnett, Cobb, DeKalb, Forsyth, Cherokee, Clayton, Henry, Douglas, Paulding, Rockdale, Newton, Fayette, and Coweta. This covers Atlanta proper, Buckhead, Decatur, Sandy Springs, Roswell, Alpharetta, Marietta, Duluth, Lawrenceville, Johns Creek, Smyrna, Peachtree Corners, and Brookhaven.

Extended Coverage

We also serve Barrow, Bartow, Butts, Carroll, Dawson, Gordon, Greene, Habersham, Hall, Haralson, Jackson, Jasper, Lamar, Madison, Meriwether, Monroe, Morgan, Oconee, Pickens, Pike, Polk, Putnam, Spalding, Troup, Upson, Walton, and White counties.

Not sure whether we reach you? Contact us and we will confirm same-day.

New Construction Inspection FAQs

Do I need a new construction inspection if the county already inspects the home?

Yes. County and city inspectors check that a home meets minimum building code, and they work for the jurisdiction. An independent new construction inspector works for you and looks at workmanship, installation quality, and defects that can pass code but still cause problems.

Schedule it after the framing, electrical, plumbing, and HVAC rough-ins are done, and before insulation and drywall go in. Ask your builder for the pre-drywall date early, since this window can close in just a few days.

Most builders allow independent inspections, but some set rules on timing, site access, or inspector insurance. Check your purchase agreement and tell your builder’s site manager you’ve hired an inspector. We’re happy to coordinate with them.

Schedule it around 10 to 11 months after closing. This gives you time to send the report to your builder before a typical one-year warranty ends. Check your warranty paperwork for your exact date.

The cost of a new construction inspection depends on which phase you need and the size of your home. Each phase (pre-drywall, final, and 11-month warranty) is priced separately. Homes outside our 60-mile service area may have a small fuel charge. For an exact price, contact us for a free quote.

You’ll get a same-day report with photos and plain-language notes. Send it to your builder so they can make repairs, either before closing or under your warranty. If you’d like, we can come back later to confirm the repairs were done.

How Can We Help?

By selecting the “Yes” checkbox you consent to receive communication via phone and/or text message from Serenity Home Inspections at (770) 335-2553. Consent is not a condition of purchase. Message frequency varies and may include scheduling availability, service descriptions and/or pricing, order information, appointment reminders, etc. Message and data rates may apply. Reply STOP at any time to end. For assistance, Reply HELP. For more information please review our Terms of Service or Privacy Policy for details on how we handle your information. We never share or sell your opt-in information.